2025 525HF3S

Categories Commercial Hedge Clippers, Husqvarna Equipment

2025 Husqvarna 525HF3S

Overview

Availability	Brochure
Model	525HF3S
Year	2025
Make	Husqvarna

Product Features

Description

Reach higher with a truly professional hedge trimmer. The Husqvarna 525HF3S is a powerful fixed pole hedge trimmer with a 26-inch, double-sided cutter bar on a 32-inch shaft. The machine has a robust design, including the commercial-grade gearbox, to withstand the toughest work. Our patented X-Torq® engine means more power and less fuel consumption and emissions compared to conventional engines.

Features

Low weight: Low weight, good balance, easy to manoeuvre
Long Cutter Bar: Extend your reach for more comfortable use
Durable gears: Long life gear components
Engine position: Exhaust fumes diverted away from the user
Simple Starting: When the stop switch has been used, it is automatically reset to ON to facilitate the next start.
Hardened Steel Blades: Optimized edge angle stays sharper longer, increases efficiency and ensures durability
High power: High power
Quick Start with Air Purge: Air purge removes air from carburetor and fuel system for easy starting
Stand alone starter: Easy to service and maintain starter
Intuitive controls: All controls are designed to be easy to understand and use.
Metal skid plate: Skid plate for engine protection

Capacity

Recommended maximum twig diameter: 0.94 in
Cutting speed: 4,339 cut/min

Engine

Cylinder displacement: 1.55 cu.inch
Power output: 1.21 hp
Fuel tank volume: 17.25 fl oz
Fuel consumption: 395 g/kWh
Maximum power speed: 8,500 rpm
Electrode gap: 0.03 in
Idling speed: 3,000 rpm
Spark Plug: NGK BPM8Y

Equipment

Knife length: 25.59 in
Teeth opening: 1.18 in

Dimensions

Length, transportation mode – metric: 192 cm
Weight: 13.4 lbs
Full length, including cutting equipment: 75.6 in
Sound and noise:
Sound power level, guaranteed (LWA): 105 dB(A)
Sound pressure level at operators ear: 92 dB(A)

Vibration

Equivalent vibration level (ahv, eq) rear handle: 2.9 m/s²
Equivalent vibration level (ahv, eq) front handle: 3.9 m/s²

Transmission

Gear ratio: 1

Emission

Exhaust emissions (CO2 EU V): 1,141 g/kWh

NOTES:

Disclaimer: 1Output shaft power: Net power rating as per ISO 8893, at specified RPM 2Exhaust emissions (CO2 EU V): This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.